Access control - timeCard external RFID reader V3 for access control
The external RFID reader V3 for the timeCard access control is an RFID wall reader that can read both timeCard ID cards as well as timeCard transponders. It can be installed both indoors and in protected outdoor areas using surface mounting.
The innovative design of the product enables quick and easy installation thanks to the two-part housing construction. The integrated snap-in terminal strip in the rear case ensures a convenient connection. During installation, the front case with the electronics is simply snapped onto the pre-wired rear case and secured with two stainless steel screws. An injected special seal ensures that the housing is sealed. Thanks to the advanced circuit design, transponders or RFID cards are detected and read early and reliably, supported by a four-color backlight and acoustic signaling. The external RFID reader V3 can be connected to the following terminals:
Device category: | RFID wall reader fortimeCardaccess control |
Supported cards / transponders: | timeCardID Card or transponder based on MifareDESFire EV1 and EV2 (13.56 MHz) |
Interface: | RS422 withtimeCardprotocol |
Updateable: | ✓ AbouttimeCardTerminal 3 |
Power supply: | ✓ ViatimeCardterminal / accessbox |
Housing colors: | Anthracite |
Dimensions (LxWxH): | 91 x 91 x 22 mm |
Weight of individual device (without packaging/with packaging): | approx. 100 g / 200 g |
REINER SCT article number: | 2716050-103 |
EAN code: | 4011170084376 |
Scope of delivery: | timeCard external RFID reader V3, quick guide, 2 mm Allen key |
Warranty: | 2 years |
Yes
No, the new card technology is mandatory for all banks and savings banks worldwide in order to be internationally interoperable.
A strong password alone can still be compromised. The 2FA provides an additional layer of security and protects your account even if your password is stolen.
The 2FA increases security because even if an attacker finds out a user’s password, they cannot access the account without the second factor.
The technology of the girocard has been further developed. This is why the new girocard is no longer compatible with the optic TAN generators.
The technology of the Sparkassen-Card / DKB Girocard has been further developed. Therefore, the new Sparkassen-Card / DKB Girocard is no longer compatible with the chipTAN optic TAN generators.
You are currently viewing a placeholder content from Facebook. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information