Technical information on the Secoder 2.2 module
A Secoder 2.2 module in accordance with the current online banking standard of the German Banking Industry (formerly ZKA) is available in the firmware for the following security class 3 chip card readers:
- cyberJack secoder
- cyberJack e-com
- cyberJack e-com plus
- cyberJack RFID standard
- cyberJack RFID comfort
With the cyberJack secoder, cyberJack RFID standard and cyberJack RFID comfort, the Secoder 2.2 module is mandatory when updating the firmware and cannot be deselected.
For chip card readers:
- cyberJack e-com(a)
- cyberJack e-com plus
you can select whether the Secoder 2.2 module should be installed or not.
Important: The catchy slogan “Once a Secoder, always a Secoder” applies to all the chip card readers mentioned above. This means that, for security reasons, once the Secoder 2.2 module has been activated, it can no longer be unloaded or deactivated, which is why you will also receive the corresponding instructions before a firmware update.
If the Secoder 2.2 module has been successfully loaded into the chip card reader, the following text is permanently shown on the reader’s display in standby mode:
Secoder 2
V2.2.0